Deus Programs
Jonathan White's
BEAST Program
Base Mode : Deep
HF Coil
Disc: 4.0
Sens: 93
Frequency: 28.8 Khz
Iron Vol: 2
Reactivity: 2
Audio Response: 5
Notch: 0
Tones: 2 - (Tone:1 120 Hz - Tone:2 993 Hz)
Tone Break: 4.0
Silencer: -1
Audio Overload: 1
GB: 90
X35 Coil adjustments 17 or 25 Khz
Cold
Load up the default Gold Maxx Power settings….Change
Discrimination…..6
Tones…2 tones >Tone 1 (202) Tone 2 (702)
Frequency….11.7
You can see how close to the factory pre sets these settings are, however small tweaks can make a big difference.
Hot
Load up the Deus fast program....Change
Discrimination.....between 0 and 5, if you have problems identifying differences between low tones use disc 5 and dig every repeatable tone
Tones....Full tones
Iron Vol.....0
Audio response....3-4
Here we have some big changes, at first don't be afraid to use a discrimination of 3 - 5 until you get used to the audio feedback.
*Discrimination notes : Disc 0 will accept all the ground noise as a baseline, this is good if you want to hear ground changes. Disc 1 will eliminate ground noise and only accept Iron as a baseline.
Sids 5.2 Hammy Program
Disc 3.2
(Expert) 4 Tones 1st=202, 2nd =202, 3rd=610, 4th=782, same screen disc 3.2, 28, 68,
Sens 92
Txpwr 2
Freq 17.4 /11.7
Iron Vol 2
Reactivity 2
Silencer 2
Audio Resp 04
Notch 00 - 00
GB 89
Sids 5.2 Pro Program
Disc -2.8
(Expert) 5 Tones 1st=120, 2nd =202, 3rd=559, 4th=680, 5th=782, same screen disc -2.8, 07, 30, 69
Sens 92 / 93
Txpwr 2
Freq 17.4
Iron Vol 2
Reactivity 2.5
Silencer -1
Audio Resp 04
Notch 00 - 00
GB 89
Sifter
Load up the HOT program and change :
Discrimination : 0
Sensitivity : 86
Audio Response : 4
TX Gain : 1
Ground Manual : 88
Garys XP Deus Sonar program
Edit program 6
Disc -6.4
(Expert) 3 Tones 1st=202, 2nd =202, 3rd=891, same screen disc -6.4, 09,
Sens 90
Txpwr -1 (x35 coil)
Freq 17
Iron Vol 0
Reactivity 4
Silencer -1
Audio Resp 04
Notch 00 - 00
GB 89
Ultimate / Fast Site
Load up the Deus fast program….Change
Discrimination….0 (-6.4 if you are using version 4.x)
Tones….3 tone, Tone 1 (202) Tone 2 (202) Tone 3 (710), scroll around again and change the cut off/disc to 10
Iron Vol…..0
Audio response….3 if you are using WS4 headphones – Audio response 4 if you are using WS5 headphones.
Discrimination….0 (-6.4 if you are using version 4.x)
Tones….3 tone, Tone 1 (202) Tone 2 (202) Tone 3 (710), scroll around again and change the cut off/disc to 10
Iron Vol…..0
Audio response….3 if you are using WS4 headphones – Audio response 4 if you are using WS5 headphones.
This is a 2 tone program and is a little sparky, works very well with the high frequency search coils.
If you have a very slow sweep speed use reactivity 2
If you have a very slow sweep speed use reactivity 2
*Note :
Setting a discrimination at -6.4 will allow maximum feedback including ground feedback – If you do not want to hear ground feedback raise the discrimination to -2, this will still allow you to hear the iron tone.
Setting a discrimination at -6.4 will allow maximum feedback including ground feedback – If you do not want to hear ground feedback raise the discrimination to -2, this will still allow you to hear the iron tone.
PDF files (zipped)
Sundage Program for the XP Deus Metal Detector
This is an all round deep program perfect for stubble and pasture where ground penetration is important.
Program is as follows -
Base Program is number 2 Goldmaxx power
Disc - 3.9
Tone breaks 202,202,590,930 - 3.9,28,65
Sensitivity - 93
TX Power - 3
Frequency - 11.6khz (14khz for HF Coil)
Iron Vol - 4
Reactivity - 2.5
Silencer - -1
Audio Res - 4
Notch - 00-00
* remember no program is ever 100% compatible with every site so ground balancing is a must to keep things stable*